| |
OLD Product!
SATELLITE INDUCTION MAGNETOMETER
LEMI-106HS
The super-light induction magnetometer
LEMI-106HS is intended for measurements of alternating magnetic fields in
space during scientific investigations. New calculation methodology using
minimal mass criterium allowed to minimize the weight of LEMI-106HS,
conserving low noise level in wide frequency band. It can be used with any
analog measuring unit. |
Technical Specifications
Full frequency band of received signal, Hz |
1 … 20000 |
Frequency characteristics flatness in the pass band, kHz |
1 … 20 |
Transformation factor, mV/nT |
100 |
Output parameters (at every of two symmetrical outputs):
max. output voltage, V
output resistance, Ohm
min. loading resistance, kOhm |
± 5
<
100
5 |
Short-time short-circuiting protection is available.
Magnetic noise level, pT×Hz-1/2:
at 10 Hz
at 100 Hz
at 1 kHz
at 10 kHz |
£
2.5
£
0.2
£
0.02
£
0.003 |
Power consumption, W |
£
0.24 |
Temperature range,
°C:
operation mode
switched off state |
minus 50 … +50
minus 150 … +70 |
Outer dimensions, mm
|
l
= 300
b ´
h £
35mm
´
35mm |
Weight,
g |
~ 95 |
|